26mm 20x7135 7.6A Slave Board PCB - Bare

26mm 20x7135 7.6A Slave Board PCB - Bare
26mm 20x7135 7.6A Slave Board PCB - Bare
Product Code: PCB-7135SLV-26MM-BARE
Availability: 7
Price: $1.75
Qty:     - OR -   Add to Wish List
Add to Compare

This 26mm 20x7135 slave board will allow you to increase your output current by up to 7.6A.  It is designed to be "piggybacked" onto your qlite/105C 7135 based driver and use that PWM signal to switch the 7135 chips on the slave board as well.

This driver will fit inside of most 27mm driver compartments, given sufficient depth.

Specifications:

  • 20x380mA 7135 Chips (approximately 7.6A maximum output)
    • Output may be limited by cell(s) used, LED forward voltage, and other resistance points.
  • Diameter: ~26.2mm
  • Thickness: ~4.7mm

The connection points are similar between the 16mm/19mm/26mm Slave Boards

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By Lumens
Mountain Electronics LLC © 2024