22mm 16x 7135 6A LED DRIVER

22mm 16x 7135 6A LED DRIVER
22mm 16x 7135 6A LED DRIVER
Product Code: 22MM-7135-DRV-AW
Availability: Out Of Stock
Price: $13.29


Available Options


* Alternate Firmware:

Increase/Reduce Driver Current 7135:

Zener Mod?:




* Spring Selection:

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Email:



  - OR -   Add to Wish List
Add to Compare

This driver, designed by Alex Wells (wight), is a great option for a regulated 22mm driver.  With LED current options ranging from ~1A all the way up to 6A, you can easily dial in your LED current.

Because each driver is custom built to order, there is a 3-10 day waiting period after ordering this driver.

 

As usual, there are plenty of different firmware options available! (See below)

 

Increase/Reduce Driver Current 7135 Option

 

By default, the 22mm 7135 driver comes with 16*380mA 7135 chips.  You can decrease the output current by removing 7135 chips, each chip removed subtracts around 380mA. 
 

 

Features:

*Input voltage: 2.8V - 4.5V

*Default Current: 6A (without removing any 7135 chips)

*Constant current

*PCB diameter: 22mm

*PCB thickness: 1.6mm

*Components height: 4.7mm

*Reverse polarity protection

*Gold plated contacts

*22 AWG Silicone Leads Pre-Soldered

 

Spring / Contact Options

  • No Spring or Contact Soldered
  • QLITE Spring -  This short but stiff option works well for most lights.
  • Copper Braided Spring - This is a taller and wider spring that has been copper braided to reduce electrical resistance.
  • Brass Button - A short brass button to help raise the battery contact surface 2mm.  Low resistance but no spring action.  

 

FIRMWARE OPTIONS --- CLICKY SWITCH (Normal Rear Switch)

 

guppydrv Universal Firmware

This firmware allows the ultimate in user customizability, with 22 built-in mode groups, that the user can select via a series of button presses and a user programmable turbo timer (see below for instructions).  

 

User Selectable Groups:

  1. 2% - 25% - 100% | Memory
  2. 100% - 25% - 2% | No Memory
  3. 2% - 25% - 100% - Strobe - Beacon | Memory
  4. 2% - 25% - 100% - Strobe - Beacon | No Memory
  5. 15% - 100% | Memory
  6. 100% - 15% | No Memory
  7. 100% Only
  8. 100% - Strobe | No Memory
  9. Strobe - 100% | No Memory
  10. ML - 5% - 33% - 100% | Memory
  11. 100% - 33% - 5% - ML | No Memory
  12. ML - 5% - 33% - 100% - Strobe - Beacon | Memory
  13. ML - 5% - 33% - 100% - Strobe - Beacon | No Memory
  14. ML - 100% | No Memory
  15. 100% - ML | No Memory
  16. ML - 100% | Memory
  17. ML - 5% - 15% - 50% - 100% | Memory
  18. ML - 5% - 15% - 50% - 100% | No Memory
  19. 100% - 50% - 15% - 5% - ML | Memory
  20. 100% - 50% - 15% - 5% - ML | No Memory
  21. 2% - 15% - 50% - 100% | Memory
  22. 2% - 15% - 50% - 100% | No Memory

Guppydrv ​Instructions

To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash.  With the light in programming mode, tap the switch the same number of times as your desired mode group.  The light will blink and your mode group will be memorized. 

 

Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode.  As soon as the light enters programming mode and starts flashing, tap the switch three times (for group 3).  The light will blink to recognize the mode group change.

 

To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash.  With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode.  The light will then switch to 100% power.  When the light is at the desired temperature for the turbo step down, turn the light off.  The turbo timer will then be set.  Turbo timer drops down to 50% output.

 

To lock the mode groups: Solder Star 2 to ground.  The other stars have no function with this firmware. 

 


 

STAR Off-Time Firmware

This firmware will allow you to fully customize your light!  Moonlight and mode order are all selectable via solderable stars (see below).

When selecting this option, please define the following in your checkout comments:

  1. Number of light levels:  up to 6 (plus moonlight).
  2. Approximate output levels of each mode.  Example:  (1) 2% - (2) 15% - (3) -  50%  (4) - 100%
  3. Approximate Turbo Timer stepdown time:  15 to 120 seconds.

Off-time changes the way that the memory function works, making it much more intuitive to use.  If "memory" is chosen, one tap will always change modes and switching the light off will always save the last mode used.  If "no memory" is chosen, the light will always switch modes with a single tap, but will return to the first mode after the light has been switched off.  


 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:





© Mountain Electronics LLC International Store